Air bag Air Springs are usually used in buses and light commercial vehicles. Recently they also started to be used in trucks by vulcanizing metal connection parts. Besides, they are used as a third axle spring or lifting spring in some vehicles.
NL560 Eclipse air brake tubing is a lightweight, semi-rigid tubing
used for air brake, instrumentation and accessory systems on trucks,
trailers, buses and other commercial vehicles.
Anti–Vibration Components From Automotion. Anti–vibration
bases are mounts, feet or supports used to reduce noise and
isolate vibration in equipment such as engines, machines or
air conditioning units. They are available in different
styles such as bolt down, rubber footed, cylinder, pads
or mats.
A wheel bearing snap ring. Wheel hub – A forged or cast piece
of metal that an automobile wheel mounts to. Wheel bearing
assemblies typically fit inside the center of the wheel hub
to allow free rotation around an axle shaft or spindle.
A disc brake is a type of brake that uses the calipers to squeeze
pairs of pads against a disc or “rotor” to create friction. This
action slows the rotation of a shaft, such as a vehicle axle,
either to reduce its rotational speed or to hold it stationary.
A drum brake is a brake that uses friction caused by a set of
shoes or pads that press outward against a rotating cylinder-shaped
part called a brake drum. The term drum brake usually means a brake
in which shoes press on the inner surface of the drum.
The brake shoe carries the brake lining, which is riveted
or glued to the shoe. When the brake is applied, the shoe
moves and presses the lining against the inside of the drum.
The friction between lining and drum provides the braking
effort. Energy is dissipated as heat.
Reverse modulating valves are used in negative braking systems
for controlled actuation of a spring apply/hydraulic release
service brake. As the pedal is applied, pressure to the brake
is reduced causing the brake to engage.
-Relay Valves, Pressure Protection Valves, Spring Brake Control
Valves, Quick Release Valves, Dash Valve, Foot Valve, Governor,
Check Valve.
An exhaust system is usually piping used to guide reaction exhaust
gases away from a controlled combustion inside an engine or stove.
The entire system conveys burnt gases from the engine and includes
one or more exhaust pipes. … Cylinder head and exhaust manifold.
A turbocharger to increase engine power.
A fuel line is a hose used to bring fuel from one point in a vehicle
to another or from a storage tank to a vehicle. … The United States
Environmental Protection Agency defines a fuel line as “all hoses
or tubing designed to contain liquid fuel or fuel vapor.
Whereas some years ago most reflectors were made of sheet steel,
the demands made on headlamps today, such as production tolerances,
design, surface quality, weight etc. lead to the use of mainly
plastics (various thermoplastics) for reflectors. These are
manufactured with a high accuracy of mold reproducibility.